Rockwell Automation 1760-DNET Pico DeviceNet Communications Module User Manual - Manual (Page 79)

Publication 1760-UM003A-EN-P - September 2005
Application Examples for Pico 6-35
Table 6.67 Error codes
Error code Description
0x01 An unknown telegram has been sent.
0x02 An unknown object has been sent.
0x03 An unknown command has been sent.
0x04 An invalid instance has been sent.
0x05 An invalid parameter set has been used.
0x06 An attempt has been made to write a variable which is not a constant.
0x0C The device is in an invalid device mode. STOP l RUN or RUN l STOP
0x0D An invalid display access occurs. Please exit the menu level to allow the
status display to be shown on the display. Writing to the clock is not
possible.
0xF0 An attempt has been made to control an unknown parameter.
0xF1 Invalid value