Rockwell Automation 1760-DNET Pico DeviceNet Communications Module User Manual - Manual (Page 85)

Publication 1760-UM003A-EN-P - September 2005
Pico GFX Control Commands 7-5
Switching rule bit array
Table 6.71 Index 01 – Summer/Winter time switchover
Byte Content Value (hex)
Master Slave
2 3 Data 1 Area
None 00
Manual 01
Automatic EU 02
Automatic GB 03
Automatic US 04
Rule
(1)
(1) Detailed setting possibilities for Pico GFX from version 05
05
for “Area” = “manual”:
3 4 Data 2 Set summer time day (1 to 28,
29, 30, 31 depending on month
and year). 00 – 3B
4 5 Data 3 Set Summer time month (1 to 12) 01 – 1F
5 6 Data 4 Set winter time day (
1 to 28, 29, 30, 31
depending on month and year) 01 – 0C
6 7 Data 5 Set Winter time month (1 to 12) 00 – 63
for “Area” = “Rule”
(1)
:
3 – 6 4 – 7 Data 2 – 5 Summer time switching rule Table 6.73
Table 6.72 Index 02 – Winter time (only valid if Area = “Rule” selected)
Byte Content Value (hex)
Master Slave
2 3 Data 1 Area = Rule 01
3 – 6 4 – 7 Data 2 – 5 Winter time switching rule Table 6.73
TIP
Refer to 1760-UM002 for more information. The
following table shows the composition of the
corresponding data bytes.