Rockwell Automation 1760-DNET Pico DeviceNet Communications Module User Manual User Manual
Page 43
Advertising
Publication 1760-UM003A-EN-P - September 2005
Direct Data Exchange with Pico/GFX (Polled I/O Connection) 5-7
EXAMPLE
Value 2Bhex = 0010 1011bin:
Enables R6, R4, R2 and R1.
TIP
If control commands and I/O data are used at the
same time:
• The inputs will retain their previous state until
this control command has been executed.
• The input bytes will be updated after the data
exchange control command has been executed.
Advertising