Rockwell Automation 1760-DNET Pico DeviceNet Communications Module User Manual - Manual (Page 133)

Publication 1760-UM003A-EN-P - September 2005
Pico GFX Control Commands 7-53
Numerical converter: NC01 – NC32
0 1 Type 0F 0F
1 2 Instance 01 – 20 01 – 20
2 3 Index
Bit IO 00 00
Mode 01 01
3 – 6 4 – 7 Data 1 – 4 00 depending on index,
Table 6.169, 6.170
Table 6.169 Index 0 – Bit IO
Bit 7 6 5 4 3 2 1 0
FB input Data 1 – – – – – – –
T
(1)
(1) Trigger coil. The appropriate Reset is executed if the coil is triggered (with a rising edge).
FB output Data 3 – – – – – – –
Q1
(2)
(2) Status 1 if the trigger coil MR..T is 1.
Table 6.170 Index 1 - Mode
Data 1
(hex)
00 Q Outputs Q.., *Q.., S.., *S.., *SN.., QA01 are reset to 0. *
depending on the NET-ID
01 m The marker range MD01 to MD48 is reset to 0.
02 ALL Has an effect on Q and M.
Table 6.171 Telegram Structure
Byte Meaning Value (hex), sent by
Master Slave Master Slave
Attribute ID
Read 92 –
Write B2 –
Table 6.168 Telegram Structure
Byte Meaning Value (hex), sent by
Master Slave Master Slave