Rockwell Automation 1760-DNET Pico DeviceNet Communications Module User Manual - Manual (Page 95)

Publication 1760-UM003A-EN-P - September 2005
Pico GFX Control Commands 7-15
Local P buttons: P1 – P4
The local P buttons are the display cursor buttons of the Pico GFX
basic unit. You can scan the buttons in both RUN and STOP mode.
Only one byte has to be transferred for the P buttons.
TIP
Ensure that the P buttons are also activated via the
SYSTEM menu (in the basic unit).
Table 6.89
Byte Meaning Value (hex), sent by
Master Slave Master Slave
Attribute ID: Read 91 –
0 Response:
Read successful – C2
Command rejected – C0
0 1 Len 02 02
1 2 Type 06 06
2 3 Index 00 00
3 4 Data 1 (Low Byte) 00 Table 6.90
4 – 6 5 – 7 Data 2 – 4 00 00
Table 6.90 Byte 4: Data
Data 1 Bit 7 6 5 4 3 2 1 0
P1 0/1
P2 0/1
P3 0/1
P4 0/1
– 0
– 0
– 0
– 0