Rockwell Automation 1760-DNET Pico DeviceNet Communications Module User Manual - Manual (Page 20)

Publication 1760-UM003A-EN-P - September 2005
3-2 Operate the DeviceNet Interface
• The basic unit is accessible (password protection not activated).
• The basic unit has a valid operating system version.
• The basic unit is in STOP mode.
1. Press the DEL + ALT keys to change to the special menu.
2. Use the cursor keys Í or Ú to change to the Configurator.
3. Press OK.
4. Select the LINK.... menu with the Pico-GFX units.
5. Press OK.
The DEVICENET menu appears.
6. Set the address using the cursor keys:
– Set the current numeric value using the Í or Ú keys.
– You can change the current numeric value using ú or í .
+
PASSWORD...
SYSTEM...
GB D F E I
CONFIGURATOR
PASSWORD...
SYSTEM...
GB D F E I
CONFIGURATOR
NET...
LINK...
DEVICENET
MAC ID 0026
222-01.20- D
2 . . . 9 0
1 . . .
o
0 0 0
1
P P 0 0 0
1
o
1
0 9 . . .
2 . . .