Unpacking and inspection – Fluke Biomedical SigmaPace 1000 User Manual
Page 21
Introduction and Specifications
Unpacking and Inspection
1
1-7
•
Dual-channel signal acquisition for capturing synchronous transvenous
AV-Sequential pacemaker pulse output data.
•
Interactive pacemaker and ECG simulation with 5 Lead output.
•
A Sleep mode conserves the charge of the internal lithium-ion battery
when not in use. Sleep mode is disabled when the external power supply
is plugged into a suitable voltage source.
•
A “HOLD” function to “freeze” readings on the LCD.
•
Test features for battery load current and dc leakage measurement.
Unpacking and Inspection
When unpacking the Analyzer, check for damage during shipment. If the
Analyzer has been damaged, call your Fluke Biomedical Service Center
immediately. If you must return the Analyzer to Fluke for service, follow the
procedure given under “Service and Calibration.”