Fluke Biomedical SigmaPace 1000 - Manual (Page 33)

Introduction and Specifications
Instrument Specifications
1
1-19
Simulation
Waveform ........................................................... SSQ
Atrial Channel ..................................................... Simulated P-wave
Width............................................................... 30 mS
Amplitude........................................................ 2.0 mV
peak
Ventricular Channel ............................................ Simulated R-wave
Width............................................................... 40 mS
Amplitude........................................................ 2.5 mV
peak
PR Interval .......................................................... 90 mS
Interactive Simulated Rates
Default Settings
Underdrive ...................................................... NSR @ 85 % of measured pulse
interval / rate
Overdrive ........................................................ NSR @ 115 % of measured pulse
interval / rate
Manual Control ............................................... The under / overdrive NSR simulations
can also be independently adjusted in
1 BPM increments.
Manual Rate Limits
Underdrive (minimum) .................................... 10 BPM
Overdrive (maximum) ..................................... 300 BPM
Active Outputs (Synchronous)
Selected Ventricular Channel Test Load
Selected Atrial Channel Test Load
Pacemaker Compatibility
Pulse Rate Range............................................... 30 to 200 PPM
Intended Pacemaker Types
VVI (Ventricular Channel Only: Pace and Sense)
AAI (Atrial Channel Only: Pace and Sense)
DDD (Both Channels: Pace and Sense)
Asynchronous Mode Test
Test Type ............................................................... Qualitative
Channels
Single.................................................................. Atrial or Ventricular Only
Dual .................................................................... A+V