Maintenance, Avoiding damage – Fluke Biomedical SigmaPace 1000 User Manual
Page 52
Advertising
SigmaPace 1000
Operators Manual
2-8
F1
F2
F3
F4
eyr057.eps
1. Press
F1 VIEW ANGLE
to adjust the viewing angle.
2. Press
F2 COM PORT
to select baud rate.
3. Press
F3 BATT
to view battery voltage and charging status.
4. Press
F4 DIAG TEST
to select calibration and display test functions.
Maintenance
The Analyzer requires little maintenance or special care; however, it is a
calibrated measuring instrument and should be treated as such. The following
describes how to maintain the Analyzer and the method of company support.
Avoiding Damage
Do not drop the instrument or subject it to any mechanical abuse that could
cause a shift in the calibrated settings.
Advertising