Fluke Biomedical SigmaPace 1000 - Manual (Page 9)

Contents (continued)
iii
Non-Capture ................................................................................. 4-7
Non-Function................................................................................ 4-7
DC Leakage ...................................................................................... 4-7
Static Tests (Pacemaker Power OFF): .......................................... 4-8
Dynamic Tests (Pacemaker Power ON):....................................... 4-9
Current Drain Test ............................................................................ 4-9
Long Term Test ................................................................................ 4-11
Setup and Testing ................................................................................. 4-11
Output ............................................................................................... 4-13
Demand Mode and Dual-channel (AV) ECG Signal ........................ 4-16
Continuous Mode and Dual-channel (AV) ECG Signal ................... 4-18
Demand Mode Pacemaker’s Ability to Sense ECG Activity ............ 4-20
Amplitude of ECG Signal for a Demand Mode Pacemaker.............. 4-23
Pacemaker’s Ability to Filter Line Noise.......................................... 4-28
DC Leak Test................................................................................ 4-31
DC Load Test................................................................................ 4-34
ECG Simulation Test .................................................................... 4-36
Long Term Tests............................................................................... 4-38
5 Remote Operation .................................................................... 5-1
Introduction .......................................................................................... 5-3
Entering Remote Mode ..................................................................... 5-3
Working in Remote Mode ................................................................ 5-3
Exiting Remote Mode ....................................................................... 5-3
Command Syntax.............................................................................. 5-4
Responses to Commands .................................................................. 5-4
Remote Mode Analyzer Setup Commands ....................................... 5-4
Error Codes....................................................................................... 5-5
Transcutaneous Pacemaker Remote Setup and Testing ........................ 5-6
Transvenous Pacemaker Remote Setup and Testing............................. 5-13