Hypertherm HTA Rev 6.00 Install Guide - Manual (Page 190)

178 Installation & Setup Guide
I/O Configuration Type “B”
This shape cutting control has been specifically designed and configured to connect to a Burny 3 or
Burny 5 style wire harness system without modification. Outputs are relay contact rated at 1 amp at
120 VAC. Inputs are optically isolated and can operate at 24 – 120 VAC/DC.
Oxy Fuel and Plasma Connectors
The Oxy Fuel and Plasma connectors are standard sex circular CPC connectors from AMP.
I/O Mating Connectors
Connector AMP #206150-1
BackShell AMP #206138-1
Sockets (16-18 ga) AMP #66101-3
Sockets (20-24 ga) AMP #66105-3