Hypertherm HTA Rev 6.00 Install Guide - Manual (Page 193)

Appendix D: Edge™ Machine Interface 181
Encoder Connectors
The Encoder connectors are a standard sex circular CPC connector from AMP.
NOTE: For optimum noise immunity, cable shields may be tied externally to the control enclosure.
Encoder Mating Connectors and Cables
Connector AMP #206708-1
Backshell AMP #206966-1
Sockets (20-24 ga) AMP #66105-3
Cabling: Use Belden # 9504 or equivalent for encoder signals
Encoder Pinout
Pin
Description
7 Power Output
1 Power Common
8 Channel A input
3 Channel /A Input
9 Channel B Input
5 Channel /B Input
6 Channel Z Input
2 Channel /Z Input
4 Shields