Error codes -10, Error codes – Hypertherm HPR260 Manual Gas Preventive Maintenance Program Rev.5 User Manual

Page 154

Text mode
Original mode

Advertising

MAINTENANCE

5-10

HPR260 Auto Gas

Instruction Manual

Error codes

Error codes are displayed on the CNC screen. The diagnostic screen shown below is for reference. The screens you
work with may be different, but should include the functions described in the Operations section of this manual.

Advertising

This manual is related to the following products:

HyPerformance HPR130 Auto Gas THC X-Y Table Torch Height Control HyPerformance HPR130 Manual Gas HD4070 Rev.1 HPR260 Auto Gas Preventive Maintenance Program Rev.4 Powermax1650