Hypertherm HPR260 Manual Gas Preventive Maintenance Program Rev.5 - Manual (Page 69)

INSTALLATION
3-20 HPR260 Auto Gas Instruction Manual
3
Power supply to selection console cables
Control cable 5
Power cable
6
Cable signal list – power supply to selection console
Power supply end Selection console end
Pin # Input/Output Description Pin # Input/Output Function
1 unused 1
6 unused 6
2 Input/Output CANL 2 Input/Output CAN serial communication
7 Input/Output CANH 7 Input/Output CAN serial communication
3 CAN Ground 3 CAN ground reference
9 unused 9 unused
8 unused 8
4 unused 4
5 unused 5
Cable signal list – power supply to selection console
Power supply end Selection console end
Pin # I/O Description Pin # I/O Function
1 120 VAC-Hot 1
2 120 VAC-Return 2
3 Ground 3
4 unused 4
5 unused 5
6 24 VAC-Hot 6
7 24 VAC-Return 7
Part no. Length Part no. Length
123784* 3 m (10 ft) 123737 25 m (82 ft)
123839 4.5 m (15 ft) 123738 35 m (115 ft)
123691 7.5 m (25 ft) 123739 45 m (150 ft)
123840 10 m (35 ft) 123842 60 m (200 ft)
123711 15 m (50 ft) 123843 75 m (250 ft)
123841 20 m (65 ft)
Part no. Length Part no. Length
123785* 3 m (10 ft) 123740 25 m (82 ft)
123846 4.5 m (15 ft) 123676 35 m (115 ft)
123674 7.5 m (25 ft) 123677 45 m (150 ft)
123847 10 m (35 ft) 123849 60 m (200 ft)
123675 15 m (50 ft) 123850 75 m (250 ft)
123848 20 m (65 ft)
* Cable numbers 123784 and 123785 are for use with systems that have the selection console mounted on the power supply