Ip source guard configuration – Niveo Professional NGSME16T2H User Manual

Page 102

Advertising
background image

Chapter 3: Featuring Configuration

– Web UI

Featuring Configuration

– Web UI

NGSME16T2H User Manual | 102

IP Source Guard Configuration

IP Source Guard Configuration

This page provides IP Source Guard related configuration.

Mode of IP Source Guard Configuration

Enable the Global IP Source Guard or disable the Global IP Source Guard. All

configured ACEs will be lost when the mode is enabled.

Port Mode Configuration

Specify IP Source Guard is enabled on which ports. Only when both Global Mode

and Port Mode on a given port are enabled, IP Source Guard is enabled on this

given port.

Max Dynamic Clients

Specify the maximum number of dynamic clients that can be learned on given port.

This value can be 0, 1, 2 or unlimited. If the port mode is enabled and the value of

max dynamic client is equal to 0, it means only allow the IP packets forwarding that

are matched in static entries on the specific port.

Buttons

Save: Click to save changes.

Reset: Click to undo any changes made locally and revert to previously saved

values.

Translate dynamic to static: Click to translate all dynamic entries to static entries.

Advertising
This manual is related to the following products: