Niveo Professional NGSME16T2H - Manual (Page 41)

Chapter 3: Featuring Configuration – Web UI
Featuring Configuration – Web UI
NGSME16T2H User Manual | 41
Privilege Level
The privilege level of the user. The allowed range is 1 to 15.
If the privilege level value is 15, it can access all groups, i.e. that is granted the fully
control of the device. But others value need to refer to each group privilege level.
User's privilege should be same or greater than the group privilege level to have the
access of that group.
By default setting, most groups privilege level 5 has the read-only access and
privilege level 10 has the read-write access. And the system maintenance (software
upload, factory defaults and etc.) need user privilege level 15. Generally, the
privilege level 15 can be used for an administrator account, privilege level 10 for a
standard user account and privilege level 5 for a guest account.
Check the next chapter to see how to configure privilege level.
Buttons
Add new user: Click to add a new user.