Niveo Professional NGSME16T2H - Manual (Page 118)

Chapter 3: Featuring Configuration – Web UI
Featuring Configuration – Web UI
NGSME16T2H User Manual | 118
Advanced Settings
This section descript the advanced settings of the Spanning Tree Protocol.
Edge Port BPDU Filtering
Control whether a port explicitly configured as Edge will transmit and receive
BPDUs.
Edge Port BPDU Guard
Control whether a port explicitly configured as Edge will disable itself upon reception
of a BPDU. The port will enter the error-disabled state, and will be removed from the
active topology.
Port Error Recovery
Control whether a port in the error-disabled state automatically will be enabled after
a certain time. If recovery is not enabled, ports have to be disabled and re-enabled
for normal STP operation. The condition is also cleared by a system reboot.
Port Error Recovery Timeout
The time to pass before a port in the error-disabled state can be enabled. Valid
values are between 30 and 86400 seconds (24 hours).
Buttons
Save: Click to save changes.
Reset: Click to undo any changes made locally and revert to previously saved
values.