Niveo Professional NGSME16T2H - Manual (Page 230)

Chapter 4: Feature Configuration - CLI
Featuring Configuration
– CLI
NGSME16T2H User Manual | 230
Aggregation Configuration
Feature Command Line
Static Aggregation Configuration
Aggregation Group
Configuration
Syntax:
Aggr Add <port_list> [<aggr_id>]
Example: Add port 5-8 to Group 1
>aggr add 5-8 1
>aggr del 1 (Delete the group 1)
Hash Code
Contributors
Syntax:
Aggr Mode [smac|dmac|ip|port] [enable|disable]
smac = Source MAC Address
dmac = Destination MAC Address
ip = IP Address
port = TCP/UDP Port Number
Example: Only the Source MAC Hash is enabled. The rest
mode are disabled.
>agg mode smac en
>agg mode dmac dis
>agg mode ip dis
>agg mode port dis
LACP
LACP Port
Configuration
Syntax:
LACP Configuration [<port_list>]
LACP Mode [<port_list>] [enable|disable]