Niveo Professional NGSME16T2H - Manual (Page 140)

Chapter 3: Featuring Configuration – Web UI
Featuring Configuration – Web UI
NGSME16T2H User Manual | 140
CDP TLV "Port ID" is mapped to the LLDP "Port ID" field.
CDP TLV "Version and Platform" is mapped to the LLDP "System Description" field.
Both the CDP and LLDP support "system capabilities", but the CDP capabilities
cover capabilities that are not part of the LLDP. These capabilities are shown as
"others" in the LLDP neighbors' table.
If all ports have CDP awareness disabled the switch forwards CDP frames received
from neighbor devices. If at least one port has CDP awareness enabled all CDP
frames are terminated by the switch.
Note: When CDP awareness on a port is disabled the CDP information isn't
removed immediately, but gets removed when the hold time is exceeded.
Port Descr
Optional TLV: When checked the "port description" is included in LLDP information
transmitted.
Sys Name
Optional TLV: When checked the "system name" is included in LLDP information
transmitted.
Sys Descr
Optional TLV: When checked the "system description" is included in LLDP
information transmitted.
Sys Capa
Optional TLV: When checked the "system capability" is included in LLDP information
transmitted.
Mgmt Addr
Optional TLV: When checked the "management address" is included in LLDP
information transmitted.
Buttons
Save: Click to save changes.
Reset: Click to undo any changes made locally and revert to previously saved
values.