Preparation for web interface – Niveo Professional NGSME16T2H User Manual
Page 22
Chapter 2: Preparing for Management
Preparing for Management
NGSME16T2H User Manual | 22
Preparation for Web Interface
The web management page allows you to use a standard web-browser such as
Microsoft Internet Explorer, Google Chrome or Mozilla Firefox, to configure and
interrogate the switch from anywhere on the network.
Before you attempt to use the web user interface to manage switch operation, verify
that your Switch is properly installed on your network and that every PC on this
network can access the switch via the web browser.
1.
Verify that your network interface card (NIC) is operational, and that your
operating system supports TCP/IP protocol.
2.
Wire the switch power and connect your computer to the switch.
3.
The switch default IP address is 192.168.2.1. The Switch and the connected
PC should locate within the same IP Subnet.
4.
Change your computer's IP address to 192.168.2.XX or other IP address which
is located in the 192.168.2.x (For example: IP Address: 192.168.2.30; Subnet
Mask: 255.255.255.0) subnet.