Lacp - dynamic aggregation – Niveo Professional NGSME16T2H User Manual
Page 112
Advertising
Chapter 3: Featuring Configuration
– Web UI
Featuring Configuration
– Web UI
NGSME16T2H User Manual | 112
LACP - Dynamic Aggregation
This page allows the user to inspect the current LACP port configurations, and
possibly change them as well.
Port
The switch port number.
LACP Enabled
Controls whether LACP is enabled on this switch port. LACP will form an
aggregation when 2 or more ports are connected to the same partner. LACP can
form max 12 LLAGs per switch and 2 GLAGs per stack.
Advertising
This manual is related to the following products: