Niveo Professional NGSME16T2H - Manual (Page 350)

Chapter 5: Monitor, Diagnostic, Maintenance
Monitor, Diagnostic, Maintenance
NGSME16T2H User Manual | 350
VLAN Membership
The VLAN Membership Status Page shall show the current VLAN port members for
all VLANs configured by a selected VLAN User (selection shall be allowed by a
Combo Box). When ALL VLAN Users are selected, it shall show this information for
all the VLAN Users, and this is by default. VLAN membership allows the frames
classified to the VLAN ID to be forwarded on the respective VLAN member ports.
Navigating the VLAN Monitor page
Each page shows up to 99 entries from the VLAN table, default being 20, selected
through the "entries per page" input field. When first visited, the web page will show
the first 20 entries from the beginning of the VLAN Table. The first displayed will be
the one with the lowest VLAN ID found in the VLAN Table.
The "VLAN" input fields allow the user to select the starting point in the VLAN Table.
Clicking the button will update the displayed table starting from that or the closest
next VLAN Table match. The will use the last entry of the currently displayed VLAN
entry as a basis for the next lookup. When the end is reached the text "No more
entries" is shown in the displayed table. Use the button to start over.
Navigating the VLAN Monitor page
Each page shows up to 99 entries from the VLAN table, default being 20, selected
through the "entries per page" input field. When first visited, the web page will show
the first 20 entries from the beginning of the VLAN Table. The first displayed will be
the one with the lowest VLAN ID found in the VLAN Table.
The "VLAN" input fields allow the user to select the starting point in the VLAN Table.
Clicking the button will update the displayed table starting from that or the closest
next VLAN Table match. The will use the last entry of the currently displayed VLAN
entry as a basis for the next lookup. When the end is reached the text "No more
entries" is shown in the displayed table. Use the button to start over.
Buttons
: Select VLAN Users from this drop down list.
Auto-refresh: Check this box to enable an automatic refresh of the page at regular
intervals.
Refresh: Click to refresh the page immediately.