Niveo Professional NGSME16T2H - Manual (Page 355)

Chapter 5: Monitor, Diagnostic, Maintenance
Monitor, Diagnostic, Maintenance
NGSME16T2H User Manual | 355
Diagnostic
This section provides some convenient tool for user to do switch diagnostic from
remote site.
Ping
This page allows you to issue ICMP PING packets to troubleshoot IP connectivity
issues.
Type the IP Addree, ping length (default = 56 bytes), ping count (default=5) and ping
interval (default =1). Then press "Start" to start ping remote host. After you press
Start, 5 ICMP packets are transmitted, and the sequence number and roundtrip time
are displayed upon reception of a reply. The page refreshes automatically until
responses to all packets are received, or until a timeout occurs.
ICMP Ping Output Result
PING server 192.168.2.100, 56 bytes of data.
64 bytes from 192.168.2.100: icmp_seq=0, time=0ms
64 bytes from 192.168.2.100: icmp_seq=1, time=0ms
64 bytes from 192.168.2.100: icmp_seq=2, time=0ms
64 bytes from 192.168.2.100: icmp_seq=3, time=0ms
64 bytes from 192.168.2.100: icmp_seq=4, time=0ms
Sent 5 packets, received 5 OK, 0 bad
IP Address
The destination IP Address.
Ping Length
The payload size of the ICMP packet. Values range from 2 bytes to 1452 bytes.
Ping Count
The count of the ICMP packet. Values range from 1 time to 60 times.
Ping Interval
The interval of the ICMP packet. Values range from 0 second to 30 seconds.