Niveo Professional NGSME16T2H - Manual (Page 306)

Chapter 5: Monitor, Diagnostic, Maintenance
Monitor, Diagnostic, Maintenance
NGSME16T2H User Manual | 306
counted as a Request as well as a timeout.
Other Info
This section contains information about the state of the server and the latest
round-trip time.
Name RFC4668 Name Description
State -
Shows the state of the server. It takes one of the following values:
Disabled: The selected server is disabled.
Not Ready: The server is enabled, but IP communication is not yet up and
running.
Ready: The server is enabled, IP communication is up and running, and
the RADIUS module is ready to accept access attempts.
Dead (X seconds left): Access attempts were made to this server, but
it did not reply within the configured timeout. The server has temporarily
been disabled, but will get re-enabled when the dead-time expires. The
number of seconds left before this occurs is displayed in parentheses.
This state is only reachable when more than one server is enabled.
Round-Trip
Time
Radius
AuthClientExtRoundTrip
Time
The time interval (measured in milliseconds) between the most recent
Access-Reply/Access-Challenge and the Access-Request that matched it
from the RADIUS authentication server. The granularity of this
measurement is 100 ms. A value of 0 ms indicates that there hasn't been
round-trip communication with the server yet.