Niveo Professional NGSME16T2H - Manual (Page 207)

Chapter 4: Feature Configuration - CLI
Featuring Configuration
– CLI
NGSME16T2H User Manual | 207
Port Configuration
Feature Command Line
Port Configuration
Port Group
poeswitch:/>port
Type 'up' to move up one level or '/' to go to root level
poeswitch:/Port>
Link State
Syntax:
Port State [<port_list>] [enable|disable]
Example: Enable/Disable Port 1 State. After port 1 disabled,
the port can't access the switch.
Port>state 1 en
Port>state 1 dis
Link Speed and
Duplex
Syntax:
Port Mode [<port_list>]
[auto|10hdx|10fdx|100hdx|100fdx|1000fdx|sfp_auto_ams|100
0x_ams|100fx_ams|1000x|100fx]
Example:
Port>mode 2 1000fdx (Configure port 2 to 1000 Full Duplex)
Port>mode 1-4 1000fdx (Configure port 1-4 to 1000 Full
Duplex)
Flow Control
Syntax:
Port Flow Control [<port_list>] [enable|disable]
Example:
Port>flow cont 1 en (Enable Flow Control on Port 1)
Port>flow cont 1 dis (Disable Flow Control on Port 2)