Niveo Professional NGSME16T2H - Manual (Page 169)

Chapter 3: Featuring Configuration – Web UI
Featuring Configuration – Web UI
NGSME16T2H User Manual | 169
VCL / IP Subnet-based VLAN
The IP subnet-based VLAN enties can be configured here. This page allows for
adding, updating and deleting IP subnet-based VLAN entries and assigning the
entries to different ports. This page shows only static entries.
Delete
To delete a IP subnet-based VLAN entry, check this box and press save. The entry
will be deleted in the stack.
VCE ID
Indicates the index of the entry. It is user configurable. It's value ranges from 0-256.
If a VCE ID is 0, application will auto-generate the VCE ID for that entry. Deletion
and lookup of IP subnet-based VLAN are based on VCE ID.
IP Address
Indicates the IP address.
Mask Length
Indicates the network mask length.
VLAN ID
Indicates the VLAN ID. VLAN ID can be changed for the existing entries.
Port Members
A row of check boxes for each port is displayed for each IP subnet-based VLAN
entry. To include a port in a IP subnet-based VLAN, check the box. To remove or
exclude the port from the IP subnet-based VLAN, make sure the box is unchecked.
By default, no ports are members, and all boxes are unchecked.
Adding a New IP subnet-based VLAN
Click "Add New Entry" to add a new IP subnet-based VLAN entry. An empty row is
added to the table, and the IP subnet-based VLAN entry can be configured as
needed. Any IP address/mask can be configured for the IP subnet-based VLAN
entry. Legal values for a VLAN ID are 1 through 4095.
The IP subnet-based VLAN entry is enabled when you click on "Save". The "Delete"
button can be used to undo the addition of new IP subnet-based VLANs.