Niveo Professional NGSME16T2H - Manual (Page 257)

Chapter 4: Feature Configuration - CLI
Featuring Configuration
– CLI
NGSME16T2H User Manual | 257
DSCP
Configuration
Syntax:
QoS Port DSCP Translation [<port_list>] [enable|disable]
QoS Port DSCP Classification [<port_list>] [none|zero|selected|all]
QoS Port DSCP EgressRemark [<port_list>]
[disable|enable|remap_dp_unaware|remap_dp_aware]
Note: DSCP is an advanced QoS setting, please follow the DSCP
table of upper access/core switch to configure the table. The table of
the whole network must be unified.
Storm Configuration
Strom Control Syntax:
QoS Storm Unicast [enable|disable] [<packet_rate>]
QoS Storm Multicast [enable|disable] [<packet_rate>]
QoS Storm Broadcast [enable|disable] [<packet_rate>]
<packet_rate>: Rate in fps (1, 2, 4, 8, 16, 32, 64, 128, 256, 512, 1k,
2k, 4k, 8k, 16k, 32k, 64k, 128k, 256k, 512k, 1024k, 2048k, 4096k,
8192k, 16384k, 32768k)
Example:
QoS/Storm>unic en 32768k
QoS/Storm>multi en 4096k
QoS/Storm>broad en 4k