Niveo Professional NGSME16T2H - Manual (Page 167)

Chapter 3: Featuring Configuration – Web UI
Featuring Configuration – Web UI
NGSME16T2H User Manual | 167
VLC / Protocol-based VLAN / Group Name to VLAN mapping Table
This page allows you to map a already configured Group Name to a VLAN for the
switch. The displayed settings are:
Delete
To delete a Group Name to VLAN map entry, check this box. The entry will be
deleted on the switch during the next Save
Group Name
A valid Group Name is a string of atmost 16 characters which consists of a
combination of alphabets (a-z or A-Z) and integers(0-9), no special character is
allowed. whichever Group name you try map to a VLAN must be present in Protocol
to Group mapping table and must not be preused by any other existing mapping
entry on this page.
VLAD ID
Indicates the ID to which Group Name will be mapped. A valid VLAN ID ranges from
1-4095.
Port Members
A row of check boxes for each port is displayed for each Group Name to VLAN ID
mapping. To include a port in a mapping, check the box. To remove or exclude the
port from the mapping, make sure the box is unchecked. By default, no ports are
members, and all boxes are unchecked.
Adding a New Group to VLAN mapping entry
Click to add a new entry in mapping table. An empty row is added to the table, the
Group Name, VLAN ID and port members can be configured as needed. Legal
values for a VLAN ID are 1 through 4095.
The button can be used to undo the addition of new entry.