Niveo Professional NGSME16T2H - Manual (Page 183)

Chapter 3: Featuring Configuration – Web UI
Featuring Configuration – Web UI
NGSME16T2H User Manual | 183
QoS / DSCP Translation
This page allows you to configure the basic QoS DSCP Translation settings for all
switches. DSCP translation can be done in Ingress or Egress.
The displayed settings are:
DSCP
Maximum number of supported DSCP values are 64 and valid DSCP value ranges
from 0 to 63.
Ingress
Ingress side DSCP can be first translated to new DSCP before using the DSCP for
QoS class and DPL map.
There are two configuration parameters for DSCP Translation -
1. Translate
2. Classify
1. Translate
DSCP at Ingress side can be translated to any of (0-63) DSCP values.
2. Classify
Click to enable Classification at Ingress side.