Niveo Professional NGSME16T2H - Manual (Page 159)

Chapter 3: Featuring Configuration – Web UI
Featuring Configuration – Web UI
NGSME16T2H User Manual | 159
Frame Type
Determines whether the port accepts all frames or only tagged/untagged frames.
This parameter affects VLAN ingress processing. If the port only accepts tagged
frames, untagged frames received on the port are discarded. By default, the field is
set to All.
Port VLAN Mode
Configures the Port VLAN Mode. The allowed values are None or Specific This
parameter affects VLAN ingress and egress processing.
If None is selected, a VLAN tag with the classified VLAN ID is inserted in frames
transmitted on the port. This mode is normally used for ports connected to VLAN
aware switches.
If Specific (the default value) is selected, a Port VLAN ID can be configured (see
below). Untagged frames received on the port are classified to the Port VLAN ID. If
VLAN awareness is disabled, all frames received on the port are classified to the
Port VLAN ID. If the classified VLAN ID of a frame transmitted on the port is different
from the Port VLAN ID, a VLAN tag with the classified VLAN ID is inserted in the
frame.
Port VLAN ID
Configures the VLAN identifier for the port. The allowed values are 1 through 4095.
The default value is 1.
Note: The port must be a member of the same VLAN as the Port VLAN ID.
Tx Tag
Determines egress tagging of a port. Untag_pvid - All VLANs except the configured
PVID will be tagged. Tag_all - All VLANs are tagged. Untag_all - All VLANs are
untagged.
Buttons
Save: Click to save changes.
Reset: Click to undo any changes made locally and revert to previously saved
values.