Niveo Professional NGSME16T2H - Manual (Page 264)

Chapter 4: Feature Configuration - CLI
Featuring Configuration
– CLI
NGSME16T2H User Manual | 264
Maintenance Commands
Feature Command Line
Maintenance Commands
Restart Device Syntax:
System Reboot
Example:
System>reb
System will reboot in a few seconds
Factory Defaults Syntax:
System Restore Default [keep_ip]
Example:
Software/Firmware
(Firmware Version,
Firmware Swapping,
Firmware Update)
Syntax:
Firmware Information
Firmware Swap
Firmware Load <ip_addr_string> <file_name>
Parameters of Firmware Load:
<ip_addr_string>: IP host address (a.b.c.d) or a host name
string
<file_name> : Firmware file name
Example:
Firmware Swapping
Firmware>sw
... Erase from 0x40fd0000-0x40fdffff: .
... Program from 0x87ff0000-0x88000000 to 0x40fd0000: .
... Program from 0x87ff000a-0x87ff000c to 0x40fd000a: .
Alternate image activated, now rebooting.
Firmware Update