Niveo Professional NGSME16T2H - Manual (Page 12)

Chapter 1: Product Overview
Product Overview
NGSME16T2H User Manual | 12
Product Brief Description
This Niveo Web Smart
PoE Switch is 16-port
10/100/1000Base-T + 2
Gigabit SFP Advanced
Web Management PoE Switch that is designed to strengthen its network
connections. The 16 10/100/1000Base-T ports support IEEE 802.3at PoE+
technology, up to 30W per port and maximum 100m transmission distance. The
switch equipped with AC to DC power module to support 200W power budget for
PoE. The added 2 SFP slots support 100M and Gigabit Fiber transceiver for long
distance transmission. The Switch embedded advanced web smart software engine
to support Web Management, SNMP, 802.1Q VLAN, QoS, RSTP, LACP, LLDP,
802.1X and Access Management…etc. The 4K VLAN, 8 physical queues, 13 groups
link aggregation groups are superb functionality for all applications. With these
features, the switch is ideal for the SMB network environment to strengthen its
network connection.
IEEE 802.3at Power over Ethernet (PoE+) ports
The switch features 16 IEEE 802.3at Power over Ethernet (PoE+) ports supplying up
to 30 watts per port. This product can convert standard 100~240V/AC power into
low-voltage DC that runs over existing LAN cable to power up IEEE 802.3at
compliant network accessories. It also features PoE awareness to verify whether the
network device receive power is IEEE 802.3at compliant, or only the data will be
sent through LAN cable. By adding the switch to the existing networking, installing
networking products such as Access Points and IP cameras can be easily managed
and set up. Wireless device deployments are easily located with available power
outlets and network administrators don’t need to use heavy AC power adapters
anymore.
2 Gigabit SFP Open Slots
The switch supports 2 additional SFP open slots to uplink to servers, storage, or
other switching devices for long loop reach applications. The 2 SFP slots can
support different types, speed and distance SFP transceivers. It also supports
legacy 100M SFP transceiver. If the 100M fiber infrastructure is constructed and
100M bandwidth is enough, the 100M SFP transceiver can be an optional choice for
the legacy 100M network environment.