Niveo Professional NGSME16T2H - Manual (Page 309)

Chapter 5: Monitor, Diagnostic, Maintenance
Monitor, Diagnostic, Maintenance
NGSME16T2H User Manual | 309
attempts.
Dead (X seconds left): Accounting attempts were made to this
server, but it did not reply within the configured timeout. The server
has temporarily been disabled, but will get re-enabled when the
dead-time expires. The number of seconds left before this occurs is
displayed in parentheses. This state is only reachable when more
than one server is enabled.
Round-Trip
Time
radiusAccClientExtRoun
dTripTime
The time interval (measured in milliseconds) between the most
recent Response and the Request that matched it from the
RADIUS accounting server. The granularity of this measurement is
100 ms. A value of 0 ms indicates that there hasn't been round-trip
communication with the server yet.
Buttons
The server select box determines which server is affected by clicking the buttons.
Auto-refresh: Click this box to enable an automatic refresh of the page at regular
intervals.
Refresh: Click to refresh the page immediately.
Clear:
Clears the counters for the selected server. The “ Pending Requests” counter
will not be cleared by this operations..