Niveo Professional NGSME16T2H - Manual (Page 202)

Chapter 4: Feature Configuration - CLI
Featuring Configuration
– CLI
NGSME16T2H User Manual | 202
IP IPv6 Ping6 <ipv6_addr> [(Length <ping_length>)] [(Count
<ping_count>)] [(Interval <ping_interval>)]
Example:
poeswitch:/IP>ipv6 ping6 2001:DB8::250:8bff:fee8:f800
NTP
NTP Mode Enable NTP Mode by below command:
poeswitch:/IP>ntp mode en
NTP Server Address
Setting
Syntax:
Type the NTP Server address settings by below command:
IP NTP Server Add <server_index> <ip_addr_string>
IP NTP Server Ipv6 Add <server_index> <server_ipv6>
IP NTP Server Delete <server_index>
Example:
poeswitch:/IP>ntp ser add 1 192.168.100.1
poeswitch:/IP>ntp ser add 2 168.95.1.1
NTP Setting Status Check the NTP Server settings by below command:
poeswitch:/IP>ntp conf
IP NTP Configuration:
=====================
NTP Mode : Enabled
Idx Server IP host address (a.b.c.d) or a host name string
--- ------------------------------------------------------
1 192.168.100.1
2 168.95.1.1
3