Niveo Professional NGSME16T2H - Manual (Page 237)

Chapter 4: Feature Configuration - CLI
Featuring Configuration
– CLI
NGSME16T2H User Manual | 237
MVR
Feature Command Line
MVR Configuration
MVR Mode
Syntax:
MVR Mode [enable|disable]
MVR - VLAN
Interface Setting
Syntax:
MVR VLAN Setup [<mvid>] [add|del|upd] [(Name
<mvr_name>)]
Example: MVR VLAN 2, MVR Name = Source2
MVR>vlan setup 2 add Name Source2
MVR - Port Role Syntax:
MVR VLAN Port [<vid>|<mvr_name>] [<port_list>]
[source|receiver|inactive]
Example: Port 2 = Source Port, Port 6-7 = Receiver Port
MVR>vlan port 2 2 source
MVR>vlan port 2 6-7 rec
Immediately Leave Syntax:
MVR Immediate Leave [<port_list>] [enable|disable]
Example:
MVR>immedi leave 1-10 en
MVR Configuration MVR>conf (View the settings of above configuration)
MVR Configuration:
==================
MVR Mode: Enabled
MVR Interface Setting
VID Name Mode Tagging Priority LLQI
---- -------------------------------- ---------- -------- -------- -----
2 Source2 Dynamic Tagged 0 5