Niveo Professional NGSME16T2H User Manual

Page 200

Advertising
background image

Chapter 4: Feature Configuration - CLI
Featuring Configuration

– CLI

NGSME16T2H User Manual | 200

poeswitch:/IP>setup 192.168.2.2 255.255.255.0 192.168.2.254 1

NTP

Enable NTP Mode by below command:

poeswitch:/IP>ntp mode en

Type the NTP Server address settings by below command:

Syntax:

IP NTP Server Add <server_index> <ip_addr_string>

IP NTP Server Ipv6 Add <server_index> <server_ipv6>

IP NTP Server Delete <server_index>

Example:

poeswitch:/IP>ntp ser add 1 192.168.100.1

poeswitch:/IP>ntp ser add 2 168.95.1.1

Check the NTP Server settings by below command:

poeswitch:/IP>ntp conf

IP NTP Configuration:

=====================

NTP Mode : Enabled

Idx Server IP host address (a.b.c.d) or a host name string

--- ------------------------------------------------------

1 192.168.100.1

2 168.95.1.1

3

4

5

DNS Server

Syntax:

Advertising
This manual is related to the following products: