Port configuration – Niveo Professional NGSME16T2H User Manual

Page 38

Advertising
background image

Chapter 3: Featuring Configuration

– Web UI

Featuring Configuration

– Web UI

NGSME16T2H User Manual | 38

Port Configuration

This page displays current port configurations and link status. Some of the Ports'

settings can also be configured here.

Port

This is the port number for this row.

Link

The current link state is displayed graphically.

Green indicates the link is up and red that it is down.

Current Link Speed

Provides the current link speed of the port.

Ex: 1Gfdx: 1G indicates the Gigabit Speed, fdx indicates the Full Duplex Mode.

Configured Link Speed

Select any available link speed for the given switch port.

Auto Speed: selects the highest speed that is compatible with a link partner.

Disabled: disables the switch port operation.

Fiber Speed

Configure speed for fiber port.

Note: Port speed for the Copper ports will automatically be set to Auto when dual media is
selected.

Disable SFPs (Copper port only).

SFP-Auto automatically determines the speed at the SFP.

Note: There is no standardized way to do SFP auto detect, so here it is done by reading the SFP
rom. Due to the missing standardized way of doing SFP auto detect some SFPs might not be
detectable.

1000-X force SFP speed to 1000-X.

100-FX force SFP speed to 100-FX.

Advertising
This manual is related to the following products: