Image select – Niveo Professional NGSME16T2H User Manual

Page 360

Advertising
background image

Chapter 5: Monitor, Diagnostic, Maintenance
Monitor, Diagnostic, Maintenance

NGSME16T2H User Manual | 360

Image Select

There are 2 image saved within the switch.

This page provides information about the active and alternate (backup) firmware

images in the device, and allows you to revert to the alternate image.

The web page displays two tables with information about the active and alternate

firmware images.

Note:

1.

In case the active firmware image is the alternate image, only the "Active

Image" table is shown. In this case, theActivate Alternate Image button is also

disabled.

2.

If the alternate image is active (due to a corruption of the primary image or by

manual intervention), uploading a new firmware image to the device will

automatically use the primary image slot and activate this.

3.

The firmware version and date information may be empty for older firmware

releases. This does not constitute an error.

Image Information

Image

The flash index name of the firmware image. The name of primary (preferred) image

is image, the alternate image is named image.bk.

Version

The version of the firmware image.

Date

The date where the firmware was produced.

Buttons

Activate Alternate Image: Click to use the alternate image. This button may be

disabled depending on system state.

Cancel: Cancel activating the backup image. Navigates away from this page.

Advertising
This manual is related to the following products: