HEIDENHAIN IK 5294 - Manual (Page 299)

279
1
0
Supervisor Setup
Setting serial port, machine zero and general
parameters
Use the General screen to save QC5200 configu-
ration settings, configure serial communication
data, set machine zero or configure other general
settings.
Click the Tools/Options/General menu item to dis-
play the General screen.
User access to settings
Most QC5200 system settings are configured on
the Customize, Options and CNC screens of the
Tools menu.
User access to the tools on these screens is defined
by the supervisor by checking the User settable
box at the bottom-left of the
configuration screens.
Saving user access
The supervisor’s user access settings are saved in the .5mp file at the root of the QC5000 directory.
To save the user settings immediately, click the Save now button.
To automatically save the user settings when the QC5200 program
is closed, check the Save on exit box.
Sending coefficient data to the serial port
Coefficients from the current results window can be sent to an RS-232 serial port of the user’s choice
whenever a new feature is measured. The user can also insert an ASCII delimiter between the coefficients
and include coefficient labels in the data transmission.
To send coefficients:
1 Enter the desired COM port number for the RS-232 transmission of coeffi-
cient data into the COM# field. Verify that the specified COM port is not already
reserved for some other purpose.
General Parameters
10 Supervisor setup OE.indd 39 5/9/2005 10:04:33 AM