HEIDENHAIN IK 5294 - Manual (Page 84)

64 QC5200 Series User’s Guide
Construct the datum point from
the intersection of the skew line
and the left part vertical line.
You will be asked to confirm that your reference frame is complete. Click Yes. The program will include
the datum and record the part registration.
The reference frame will be shown in the Part View win-
dow, and subsequent measurements will be referred to the
new datum.
Select the Skew Line and the
vertical line...
click the Zero Point toolbar button... Click OK to complete the
measurement
Confirm that the reference frame is complete... to complete the skew and datum
3 Quick start demo OE.indd 6 5/9/2005 9:43:13 AM