Yaskawa MP920 Communications Module User Manual
Page 165
7.5 CP-218 Transmission Definitions
7-19
7
11. Code
Handle the code for the data to be transferred at each connection according to the code
set at the remote station.
• RTU:
Specifies RTU mode when the MEMOBUS protocol is being used.
• ASCII: Specifies ASCII mode.
• BIN:
Specifies binary mode.
The codes that can be selected depend on the data in the Protocol Type column.
Note: Yes: Selectable, No: Not selectable
12. DST. Station (Remote Station’s Name)
Enter a connection comment of up to 32characters.
Protocol Type
Remarks
Extended
MEMOBUS
Yaskawa Extended MEMOBUS protocol.
MEMOBUS
Yaskawa Standard MEMOBUS protocol.
MELSEC
Mitsubishi Electric’s Ethernet Interface protocol for use with general-
purpose sequencers.
No protocol
General-purpose message communications. Data is transmitted and
received without being processed into consecutive MW registers.
Table 7.4 Selectable Codes
Protocol Type
Code
RTU
ASCII
BIN
Extended MEMOBUS
No
Yes
Yes
Extended MEMOBUS
No
Yes
Yes
MEMOBUS
Yes
Yes
No
MELSEC
No
Yes
Yes
No protocol
No
Yes
Yes