A.2.2 parameter lists (param) – Yaskawa MP920 Communications Module User Manual
Page 243
Appendix A System Functions
A.2.2 Parameter Lists (PARAM)
A-14
A.2.2
Parameter Lists (PARAM)
PARAM is one of the inputs and has a parameter list structure consisting of 17 words. The
value in PARAM is the leading address of a MW, DW, or #W register.
The parameters are shown below. No setting is required for the parameters that are blank in
the “No-protocol” column.
* 1. PARAM00 is the leading address.
* 2. “IN” when DEV-TYP is set to CP-218.
PARAM
No.
IN/
OUT
Contents
Remarks
MEMOBUS
No-protocol
00
*
OUT
Processing result
Processing result
01
OUT
Status
Status
02
OUT
*2
Remote station number
Remote station num-
ber
Remote connection num-
ber when DEV-TYPE is
set to CP-218.
03
SYS
Reserved by system.
Reserved by system.
04
OUT
Function code
05
OUT
Data address
Data address
06
OUT
Data size
Data size
07
OUT
Remote CPU number
Remote CPU number
08
IN
Coil offset
09
IN
Input relay offset
10
IN
Input register offset
11
IN
Holding register offset
Register offset
12
IN
Write range LO
Register offset
13
SYS Write range HI
Register offset
14
SYS
Reserved by system.
Reserved by system.
15
SYS
Reserved by system.
Reserved by system.
16
SYS
Reserved by system.
Reserved by system.