Yaskawa MP920 Communications Module - Manual (Page 87)

5 215IF Module
5.5.4 Setting CP-215 Transmission Definitions
5-26
3. I/O Assignments
Assign bits to I/O for high-speed or low-speed scan.
• HI: Input set for a high-speed scan.
• HO: Output set for a high-speed scan.
• LI: Input set for a low-speed scan.
• LO: Output set for a low-speed scan.
To assign I/O, move the cursor to the desired position and click HI, HO, LI, or LO at the
bottom of the display. An I/O assignment can be deleted by moving the cursor to the
desired position and clicking DEL at the bottom of the display.
4. ST#
Displays the station number set in the I/O Assignment Tab.
5. TYPE
Displays the I/O device name set in the I/O Assignment Tab.
Limitations on Changing I/O Map Assignments
The settings made in advance in the Link Assignment Tab are assigned as defaults for the
high-speed scan I/O and low-speed scan I/O. The following limitations apply when chang-
ing I/O assignments.
• I/O assignments can be deleted. (For example, “LI” can be changed to “.”)
• The scan speed designation can be changed. (For example, “LI” can be changed to
“HI.”)
• The I/O designation cannot be changed. (For example, “LI” cannot be changed to “LO.”)
„ Displaying the Link Status
The Status Tab displays the data that the 215IF is actually handling in link transmissions.
The tab only displays the settings; the settings cannot be changed.
1. Configuration Information
Displays the CP-215 configuration information.
2.
3.
4.
5.
6.
7.
8.
1.