Kyocera Ecosys m2040dn - Manual (Page 66)

Imaging
User Guide 7-8
2 Type or select the Brightness value to lighten or darken the graphic images of
the print job.
The brightest setting is +100; the darkest is -100. Zero is the default mid-level
setting. Adjusting brightness allows for the customization of graphic images if
images are printing too light or too dark.
3 Type or select the Contrast value to increase or decrease the proportion of light
to dark in the graphic images of the print job.
A high contrast setting decreases the grayscale spectrum, making light grays
lighter and dark grays darker. A low contrast setting increases the grayscale
spectrum, making light grays darker and dark grays lighter.
The highest contrast setting is +100; the lowest is -100. Zero is the default mid-
level setting. Adjusting contrast is useful if graphic images are printing too gray,
or too black and white. Text remains unaffected.
4 You can click Reset to restore the default values.
5 Click OK to save the new black and white settings.
Text and Graphics Effects
Special settings are available for printing.
Print text as black
This option prints all color text as black. It produces faster printing of color
text by reducing the amount of data sent to the printer. In black and white
printing, it increases the detail for light-colored text printed.
Print graphics as black
This option prints all color graphics with black, rather than grayscale. This
feature is intended for CAD applications.