Adding or editing watermark text, Adding or editing watermark text -4 – Kyocera Ecosys m2040dn User Manual
Adding or Editing Watermark Text
In Advanced > Watermark, click New to create a custom text watermark.
To edit a default or custom text watermark, select it from the list.
Under Watermark name, type a name, to a maximum of 39 characters. A
default watermark cannot be renamed.
Under Watermark text, type your preferred text. This option is unavailable
when editing a default text watermark.
Select the desired font, size, and style of the text.
Select the color of the watermark text from the list. The options available are
black and shades of gray.
Select the watermark Count, to a maximum of 20. In the Spacing box, type or
select the distance between two or more text watermarks in tenths of an inch or
Select the position of the text watermark with the Angle, Horizontal, and
You can also change the position and angle by clicking the buttons at the
bottom of the preview area and then clicking the watermark text. Drag the
pointer to move or rotate the watermark text.
The Rotate around center check box at the bottom of the dialog box
determines the method of rotation for the watermark text. Select Rotate around
center to position the watermark text with the center of the text as its axis, and
clear it to position the watermark text with the left end of the text as its axis.
Under Print onto, choose pages for printing the watermark:
This option prints the watermark on each document page.
First page only
This option prints the watermark on the first document page.
All pages except first page
This option prints the watermark on all pages after the first page.
Only on specified pages
This option prints the watermark on the page numbers typed in the text box.
Outside of front cover
This option prints the watermark on the front cover. This is available when
Cover mode is selected in the Publishing tab. If Cover mode and Front /
Outside or Front and back / Outside are both selected in the Publishing
tab, Outside of front cover is selected automatically.
Click Save to save the watermark.
Click OK in all dialog boxes.