Document Outline

• Preliminary Remarks
• Contents
• 1 General Notes
  • 1.1 Product
  • 1.2 Configuration
    • 1.2.1 SINUMERIK 810T with integrated machine control panel
    • 1.2.2 SINUMERIK 810T with external machine control panel
• 2 Operation
  • 2.1 Operating elements
    • 2.1.1 SINUMERIK 810T operator interface with integrated machine control panel
      • 2.1.1.1 CRT display with softkeys
      • 2.1.1.2 Display panel
      • 2.1.1.3 Address / numerical keys
      • 2.1.1.4 Editing and input keys
      • 2.1.1.5 Control keys
      • 2.1.1.6 Integrated machine control panel
    • 2.1.2 SINUMERIK 810T operator interface with external machine control panel
      • 2.1.2.1 External machine control panel
  • 2.2 Switching on / off
    • 2.2.1 Switching on the control
    • 2.2.2 Switching off the control
    • 2.2.3 Darkening the screen
  • 2.3 Operating modes
    • 2.3.1 General
    • 2.3.2 Operating modes - overview
    • 2.3.3 Selection of operating modes
      • 2.3.3.1 Selection of operating modes with integrated machine control panel
      • 2.3.3.2 Selection of operating modes with external machine control panel
    • 2.3.4 ”Reset” with change of operating mode
    • 2.3.5 Branching to operating functions within an operating mode
      • 2.3.5.1 Example for the selection of operating functions and branching to other menus
      • 2.3.5.2 Example for the selection of further operating functions within the same menu
      • 2.3.5.3 Menu display from the NC program or from the PLC
    • 2.3.6 Jumping back to operating functions in higher-level menus within an operating mode
  • 2.4 Operating mode menu trees
    • 2.4.1 "AUTOMATIC” mode
    • 2.4.2 ”JOG” mode
    • 2.4.3 ”JOG” mode (after ”TEACH IN / PLAYBACK” in ”AUTOMATIC” mode)
    • 2.4.4 ”MDI AUTOMATIC” mode
    • 2.4.5 ”REFPOINT” mode
    • 2.4.6 ”INC 1 ... INC 10 000” mode
    • 2.4.7 ”PRESET” mode
    • 2.4.8 ”REPOS” mode
    • 2.4.9 “GUIDING” (operator prompting) function
  • 2.5 Glossary of softkey functions
• 3 Operating Sequences
  • 3.0 Preliminary remarks
  • 3.1 Preparation
    • 3.1.1 Switching on
    • 3.1.2 Traverse to reference point
    • 3.1.3 Tools
    • 3.1.4 Tool offset
      • 3.1.4.1 Input of tool offset
      • 3.1.4.2 Deleting/modifying an individual offset value
      • 3.1.4.3 Deleting all offset values in an offset number D ...
      • 3.1.4.4 Automatic tool offset
      • 3.1.4.5 Integrated tool management
      • 3.1.4.6 Input of tool data
    • 3.1.5 Zero offset
      • 3.1.5.1 Settable zero offsets
      • 3.1.5.2 Programmable zero offset - external zero offset
      • 3.1.5.3 Automatic calculation of the zero offset
    • 3.1.6 Setting data: ”R PARAMETERS”, ”SPINDLE”, ”AXIAL”, ”ANGLE OF ROTATION”, ”SCALE MODIFICATION”
    • 3.1.7 Flexible plane selection
    • 3.1.8 Axis synchronization
      • 3.1.8.1 Function of the modes with “axis synchronization”
    • 3.1.9 TRANSMIT coordinate transformation
      • 3.1.9.1 Behaviour of the transformation in the modes
      • 3.1.9.2 TRANSMIT function in the various modes
      • 3.1.9.3 Monitoring the software limit switch for fictitious axes with the TRANSMIT function
    • 3.1.10 Program input
      • 3.1.10.1 Program input with the keyboard
      • 3.1.10.2 Program input with operator guiding
    • 3.1.11 Contour
    • 3.1.12 Program correction (”EDIT”): Insert/modify/delete word, insert/delete block
      • 3.1.12.1 Correction display (”CORRECTION BLOCK”)
    • 3.1.13 Program management
      • 3.1.13.1 Displaying the stored programs (”DIRECTORY”)
      • 3.1.13.2 Protection of subroutines (cycle lock)
      • 3.1.13.3 Cycle lock release (”ENABLE”)
      • 3.1.13.4 Copying a program (”COPY”)
      • 3.1.13.5 Moving a program (”MOVE”)
      • 3.1.13.6 Renaming a program (”RENAME”)
      • 3.1.13.7 Deleting a program (”DELETE”)
      • 3.1.13.8 Reorganizing the program memory (”REORG”)
      • 3.1.13.9 ”Selecting a program”
      • 3.1.13.10 Operator guidance macros (OGM) and back translation
    • 3.1.14 ”SIMULATION”
      • 3.1.14.1 Simulation ”AREA OF THE WORKPIECE”
      • 3.1.14.2 Influencing simulation
    • 3.1.15 Data input/data output
      • 3.1.15.1 Setting data bits
      • 3.1.15.2 Data input
      • 3.1.15.3 Data output
      • 3.1.15.4 Part program - block transfer
    • 3.1.16 NC in two languages
  • 3.2 Machining
    • 3.2.1 Starting a part program
    • 3.2.2 ”AUTOMATIC” operating mode - selection of the ”CURRENT VALUES” or ”CURRENT BLOCK” display
    • 3.2.3 Influencing ”AUTOMATIC” operation
      • 3.2.3.1 Influencing the program
      • 3.2.3.2 ”OVERSTORE”
      • 3.2.3.3 ”BLOCK SEARCH”
      • 3.2.3.4 Interrupting the program
      • 3.2.3.5 Program sequencing (OPS)
    • 3.2.4 ”Manual data input - automatic” (MDI AUTOMATIC) mode
    • 3.2.5 ”TEACH IN”
    • 3.2.6 ”PLAYBACK”
    • 3.2.7 ”JOG” mode
    • 3.2.8 ”Incremental” mode (”INC FEED 1 ... INC FEED 10 000”)
    • 3.2.9 ”HANDWHEEL”
    • 3.2.10 ”DRF”
    • 3.2.11 ”Actual value setting” mode (”PRESET”)
    • 3.2.12 ”Repositioning” mode (”REPOS”)
    • 3.2.13 Scratching
• 4 Monitoring Functions
  • 4.1 General
  • 4.2 Diagnostics display on the CRT
  • 4.3 Display representation
  • 4.4 Alarm numbers and groups/delete alarms
  • 4.5 DIAGNOSTICS/selection of further alarms
  • 4.6 Listing of the alarms/alarm description
• 5 Maintenance
  • 5.1 Operating data
  • 5.2 Handling the modules
  • 5.3 Replacing the battery in the battery receptacle
  • 5.4 CRT display
  • 5.5 Cleaning
• 6 Data Interfaces
  • 6.1 General
  • 6.2 Setting data for description of the interfaces
  • 6.3 Assignment of the setting data for the connection of peripheral devices
  • 6.4 Device connection data
• 7 Interfacing to the Machine
  • 7.1 General
  • 7.2 Ordering data - Options
  • 7.3 SINUMERIK 810T machine data
    • 7.3.1 General machine data
    • 7.3.2 Definition of R parameters as cycle machine data, cycle setting data
    • 7.3.3 Machine data bits
    • 7.3.4 Definition of the initial setting of the G groups
  • 7.4 Setting data
    • 7.4.1 General SD bits
    • 7.4.2 Axis-specific bits
    • 7.4.3 Spindle-specific setting data
• 8 Appendix
  • 8.1 List of abbreviations
  • 8.2 List of terms used
  • 8.3 SINUMERIK 810T operator interface - Layout