Micromod MOD: 30MLTraining Manual User Manual
Page 109
Advertising
Training Manual
PID Loop Lab
Figure 6 .43.
Changing
engineering unit
range for process
line display
• Select the OK button at the bottom of this dialog box.
• Repeat this process for the following formats:
• setpointL
• processB
• Close the Display Block with the OK button at the bottom of the dialog box.
21.
Close the loop compound:
• Right-click (click on the right button of the mouse) on the empty workspace to get
a menu as shown in the next figure:
6 - 29
Advertising
This manual is related to the following products: