Micromod MOD: 30MLTraining Manual - Manual (Page 131)

Training Manual
Creating a Tuning List
Figure 7 .8.
TL block formats
• Click on the Add button on this page/tab. The Specify Format Data dialog box
appears.
• Fill in the format fields as shown in the diagram below, to add the following
formats (where there is a blank do not make an entry):
Name Format
Type
Low
Limit High
Limit Entry Method Eng.
Units Display
State Table Entry
State
Table
PIDType State none PidTypT
Action State Enter Required PidActT PidActT
Gain Float2 .01 125 Enter Required
Reset Float2 0 25 Enter Required RPM
Preact Float2 0 32 Enter Required MIN
• The Specify Format Data dialog box is shown in the next figure:
7 - 7