Micromod MOD: 30MLTraining Manual - Manual (Page 110)

Training Manual
PID Loop Lab
Figure 6 .44.
Closing Compound
• Select Close Compound at the bottom of this menu.
• You should be back in the original page where the IF, DIF and SE blocks are
located.
22. Add the Display Tag to the Display Interface Block: The next step is to add the display tag
of the display block we configured in the previous steps to the display list in the display
interface block. During runtime, you can scroll through the displays in this list by pressing
the Tag button on the instrument.
• Start by opening the DIF (Display Interface) block as shown in the figure below:
Figure 6 .45.
Closing Compound
6 - 30