Micromod MOD: 30MLTraining Manual - Manual (Page 128)

Training Manual
Creating a Tuning List
• Select BRESET, BPREACT, ACTION, and CATYPE from this list and add them
in the same way. In addition to the three tuning terms, Controller Action
(ACTION) and Control Algorithm Type (CATYPE) are useful attributes to see
during commissioning.
a
You can select multiple attributes by pressing the Ctrl key on the keyboard and by
clicking on them with the left mouse button. Hit the Add button after multiple selection
to all the selected attributes.
Figure 7 .5.
TL block
• Click on OK on the Browse dialog. This will redisplay the TL block Properties as
shown above. The Inputs Tab will now display the attributes you just added.
a
The attributes will be displayed with full source path name of the connections. An alias
can be entered by selecting an item and typing in any alias name. This name will then
be displayed instead of the block tag and attribute name.
3. Configure text to be shown to the operator for each parameter:
• Double-click on Input 1 (1 in the first column). The Specify Input Data dialog box
appears as shown in the next figure.
• Type gain in the Display Format Name field, and GAIN in the Line 2 Text field.
7 - 4